top of page
Accuracy Standards
Every measurement is verified against the manufacturer's spec. We ensure every scan meets the ±20 mm at 10 m standard through rigorous tape-check protocols.
Manufacturer Spec
Our lidar systems are calibrated to a ±20 mm at 10 m accuracy. This is the baseline for all our spatial data, ensuring the plan is as precise as the scan.
Tape-Check Rule
Every scan is tape-checked at two known distances. If the measured distance deviates by more than 1% from the expected value, the scan is redone.
Tape-Check Log
Date
Target
Spec
Result
01/12/2026
Event Layout
±20 mm at 10 m
Pass
01/15/2026
As-Built Scan
±20 mm at 10 m
Pass
01/20/2026
Interior Floor Plan
±20 mm at 10 m
Pass
01/25/2026
Event Layout
±20 mm at 10 m
Pass
bottom of page